Potted Flower Care

Potted Flower Care


Flower Pot Care

It is difficult and troublesome to care for the flowers that come from our loved ones in the most important moments of our life in the sense of meaning and importance of that day. Here is the information you need to get;

The most important business for flowers is their soil care. The potted flowers that decorate our windows and the corners of our home are kind and naïve. That is why we need to know how to look at the soil and how to care for it, when the soil changes, how often should the fertilizer be added to the soil.

How should your home's landscapes be?

The beginning of spring is the best time to change the soil.

It helps the fertilized soil flowers become more vivid every year. The fertilizer will provide necessary minarets for plants.

For many potted plants it is very useful to mix pigeon's fertilizer into the soil in small quantities. The soil mixes with clean fine sand to make it easier to breathe, preventing the flower from fading and yellowing.

You may be interested in these issues;

· How are dried flower pots revived?

Your favorite flowers may start to fade due to small carelessness, so take care of the soil of your flower and let it see the sun by the nature of the flower.

How should the Orchid Flower be?

Orchids are one of the most delicate flowers. As some flower lovers say; The orchid starts to fade when you feel you do not like it. To the soil of the orchid flower; wood charcoal crackers, sphagnum moss, perlite, pomza, fern grass, tree ...

· Which Flowerpot Is Best For Your Flowers?

Nowadays, the biggest problem for flowers is the flower pot because according to our architecture, we like flower pots, but we hardly pay attention to the point where the flower pot blends with the flower. If it is not suitable for a potted flower we like for our house, we can put a suitable earth pot in that pot. This makes your flower easier to adopt.

What is done for the drying of flowers on the tatilde?

The flowers you grow at home will be left alone when you go on a holiday. It is worthwhile to take some precautions before you go out for the holidays because they can not solve your water and sun needs alone. The easiest and most healthy method for this is to get smart pots. In this way, even at normal times you will not forget to water your flower.

FLOWER PLANTS
Flowering plants need a normal warmth to a good daylight and a moist atmosphere and soil.
LIGHT: It would be beneficial if the flowering plants were kept in a daylight environment. Especially it will suffice to keep your house in the eastern and southern parts of your workplace.
HEAT: Flowering plants at 50-60F day and 65-70F day will prolong the life of the flower. In particular, it is necessary to keep away from radiators and air currents.
NEM: the humidity of the room should be noted. The dirtiness of the soil and even the pot will increase the productivity of the plant. When irrigation is carried out, the water must be spread over the whole soil. The best way to do this is by immersing the pot in a cube filled with water and keeping the air bubbles in water until the end of the pot is dissolved. After this process is finished, the water should be filtered from the pot.
GREEN PLANTS
LIGHT: Green plants should be kept in place with daylight, just like flowering plants. You should definitely not see direct sunshine. Autumn must be kept in the winter and early spring in the eastern and southern parts of the building, if there is no such space, it should benefit from artificial light.
IRRIGATION: Soil must always be kept in the nip and water must be passed through the soil during irrigation.
ISI: It is necessary to keep it at 60-65 F daytime and 70-80 F daytime.

WINTER MAINTENANCE FOR STEAM FLOWERS:
If the winter of the region you live in is very cold and frosty, your trees may need extra protection. If you have the opportunity, after sunset you should put your plants in a sheltered place like a roof, which is very important for protecting them from vertical airflow. Provide insulation by putting your pots in a slightly higher place and putting newspapers or foam on them. If the winds and frosts are too much, fold one end of the newspaper paper upside down and into the pot. Do not use plastic protections. In an unheated room, garages can be used for trees to pass the winter time. Place paper for insulation on the bottom of your pots. If you see the freeze statement on your bonsai, the best thing to do before pruning is to wait until new sprouts come out. Trees will surprise you with their strong structures. Do not forget to carefully observe the water needs of the trees. Irrigation can be done at longer intervals. Pay attention to the dew point. Within a few days of winter, moisture can easily disappear. DO NOT FERTIRIZE in the winter. You should not fertilize until the fluffy new shoots come out.
spring maintenance: This time of year is the time to grow again, change the pots, regenerate and regenerate. The pots of young trees that grow and grow in the same pot for several years must be changed. Before you do this, think about whether you planned to have a different pot in the bigger room. In fact, a small displacement in the pot will suffice. If you like, you can make a radical reorganization of the tabic. The ideal flower changing sprouts must be done before reaching their maximum size and opening up again. This makes it easier for a couple of weeks to live using the reserves within themselves before new nutritional roots come out and start to take nutrients. If you do not have big root cuts, this time is shorter. Work in a place where the shelter is sheltered from the wind and the humidity is good. And get a spray bottle filled with water to squeeze the roots when you need it. Use sharp tools and make clean cuts. You can make root trunks more often at your young age. Get cut by cutting large roots. Remember that the upper side and the root side of the tree grow in an interconnected manner. If you set the roots well, it will provide a nice improvement according to the wood. Use special plant foods produced for Bonsailer quite well. If you can not find it, take care of the proportions in these liquid foods. You can use a solid fertilizer that slowly releases itself slowly in the soil mixture of the plant. Have not your roots grown enough since the last pot change? O TIME: Use a thicker soil mixture, make sure the pot well drains the water, lower the nitrogen ratio of your liquid nutrients, increase the phosphate ratio, and do not apply the roots for a few years. After this process, we protect the plant from direct sunlight and wind, and slowly get used to the bityi forest again. Start to use liquid foods after a few weeks (one month per year). Finally cut off the flowers that complete the opening. If you do not want a very messy body trunk, interfere with the newly emerging spirits. Bake as two or two pairs of sprouts per branch per branch. Clean and lubricate your tools after buds.
SUMMER CARE OF STEAM FLOWERS:
You have grown trees that are suitable for your gardens. Use the recommended thick intermittent soil mixtures. Try to keep your trees healthy and insect-free. We do not turn your trees quarter a unit every week. This will ensure that there is enough sun and fresh air on each side. Do not let your fast-growing people get out of your control, especially if they are growing fast. Do not let the shape that you work on do break down. Provide fine and tight growth for air and light current. Do not forget to do special irrigation according to the needs of your trees. Move your trees to the shadows where they will not take much sunshine. Keep your plants on pebbles, grassy platforms, short-legged benches on a floor covered with dry leaves. Soak your morning in the morning. Have your trees shower occasionally. Place your trees in a larger pot in the spring. Bury your plants in places that are found on dry leaves and trees. Make sure that the roots do not come out in the drain holes. Keep your plants together but do not touch each other and leave room for good airflow. If possible, bury your trees in the ground. Pile up unwanted hill growth. If you have bonsai in your bonsai, put it in the shade and give it some water. Give that water a little more water that day. Let the roots grow slowly and do not bite them. Do not forget your fertilizers (liquid nutrients). At the end of the summer, fertilize the flowers with high percentage of phosphate for the blooming trees like 10 60 10. This tree will make reserves for next spring

AUTUMN CARE OF FLOWER FLOWERS: It is the second growth season of the year. Again prevent your trees from getting out of control in fast growing trees (like juniper). Pinch your new sprouts as long as you can. Control the evacuation of the spiky soil. For flowers that bloom, fertilize phosphate at a high rate like 10 60 10. This tree will make reserves for next spring. It applies in junipers and pines. In addition, these two breeds are best able to hold wire during these periods.
REPLACEMENT:
It is not difficult to change the pot as long as certain rules are observed.
One of the things to be careful about changing the flowerpot concerns the physiological state of the plant. The visible slowing of growth is like wilting in plant color (except disease) from the holes in the pots of the roots. Another important issue is with the pots to be replaced. If the pot is new, it should be completely absorbed in the limed water for 24 hours before it is used. This rule applies to soil pots. Old pots should be used only after brushing thoroughly under water. One of the basic rules is that the pot drainage is good. The accumulation at the bottom of the water pot will lead to rot in the roots. However, a simple drainage (the regulation of the flow of water) made with broken pot pieces will eliminate the problems that may arise.
Regarding the replacement process; The plant in the pot to be replaced is placed between the ring finger and the index finger of the left hand from the soil surface, and the pot is turned upside down. One side of the pot is lightly hit hard, allowing the plant to freely leave the pot. Place a few litter of spruce over the spout hole at the bottom of the new pot, then place 3 cm of fresh soil on it, from the root of the plant, to the middle of the pot after the old ground is shaken. The remaining space should be filled with fresh soil with 1-2 cm space at the top of the pot and hit hard to ensure that the soil is trapped. Once the replacement process is over, water is given until the soil is completely humid and a bright, warm, non-sunlit location is provided to match the new environment of the roots.
It is also important to ventilate by loosening as the potting soil is changed. For this operation, a light pointed wooden stick can be used. Care should be taken that roots are not damaged.